PLUG-AND-PLAY Kit to Install a Voyager 7" LCD monitor in place of an obsolete VOM73SN-WIN or VOM783

VOM73SN-WIN-kit -- PLUG-AND-PLAY Kit to Install a Voyager 7" LCD monitor in place of an obsolete VOM-73SN-WIN (aka: VOM-75SN, aka: VOM783) Monitor....... NOT suitable for VOM783CT. 

• (1) Voyager Heavy-Duty Color 7" LCD Monitor with a modified harness. The harness is fitted with a special connector to allow it to plug directly into the old monitor's power harness.
• (3/each) Cable Adapters to allow the existing old-style black/white Voyager camera cables to plug into the new Voyager monitor
• (1) Flush-Mount (in-dash) bracket for the Voyager monitor. 

The kit's flush-mount (in-dash) mounting bracket requires ~1/2” of flat and unobstructed area around the perimeter of the existing monitor’s dash hole. A slight amount of trimming of the opening may also be required to allow the kit’s bezel to slip into the dash hole. The flush-mount kit's overall dimensions are 9-5/8"W x 6-7/8"H x 2"D and it requires dash cutout: 8-1/8"W x 5-1/8"H

The new monitor is capable of displaying a color image, but the image will remain black/white if you continue to use black/white cameras. To upgrade to a full color system, please add the VCCYL37 color bullet cameras (for the side cameras assemblies), and the VCMS24 color rear camera listed below. These parts will connect and fit perfectly in place of their black/white counterparts.

We modify the new LCD's power harness to make it plug-and-play with the old monitor's harness -- no cutting and splicing are necessary!